The Aerpro CHSB3C Steering Wheel Control Interface (SWC) allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls. Engineered to suit various Saab models with Manual Transmission only, the steering wheel control interface includes a harness that is fitted with a vehicle specific plug designed to connect directly into the existing wiring in the vehicle with ease, no cutting of the factory wiring harness in the vehicle is required. Installation of the aftermarket headunit is simplified even further when paired with the optional Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead, which connects between the aftermarket headunit and the Aerpro Steering Wheel Control Interface.
- Please Note:
- Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
- A Steering Wheel Control Patch Lead is required to be used in conjunction with this part to enable Steering Wheel Controls to function (sold separately).
- Aftermarket headunit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
- Compatible with listed vehicles that have manual transmission only.
- Connect the yellow / black flying wire of the vehicle harness to the yellow / black wire of the steering control (refer included instructions).
- Allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls
- Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road
- Compatible with listed vehicles that have manual transmission only
- Fitted with a vehicle specific plug, no cutting of wires required
- Recommended to be installed with an Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead (sold separately)
- Requires SWC patch lead to provide compatibility with the aftermarket headunit (sold separately)
- INTERFACE TYPE: ANALOGUE
- PATCH LEAD TYPE: C
- PHONE BUTTON COMPATIBILITY: NO
- VOICE ASSISTANT BUTTON SUPPORT: NO
- OUTPUTS:
- REVERSE TRIGGER: NO
- PARK BRAKE: NO
- SPEED PULSE: NO
- ILLUMINATION: NO
- AMP REMOTE: NO
- TELEPHONE MUTE: NO
- OTHER RETENTION:
- OEM AMPLIFIED SYSTEM: NO
- NOTES:
- Aftermarket headunit must be SWC compatible.
- SWC patch lead is also required to enable SWC (sold separately).
- Compatible with listed vehicles that have manual transmission only.
- Connect the yellow / black flying wire of the vehicle harness to the yellow / black wire of the steering control (refer included instructions).
Aerpro - CHSB3C - CONTROL HARNESS FOR SAAB - VARIOUS MODELS (WITH MANUAL TRANSMISSION)
Aerpro - CHSB3C - CONTROL HARNESS FOR SAAB - VARIOUS MODELS (WITH MANUAL TRANSMISSION)